"YG Acoustic" Proizvodjac iz USA Hi End Audio opreme specijalizovanog za zvučnike najviseg kvaliteta.

"YG Acoustic" USA manufacturer of Hi End Audio prodacts specialized for speakers of highest quality.

ANAT REFERENCE II

Anat Reference II je vodeći model iz YG Acoustics linije, a u vreme pisanja ovog teksta najprecizniji zvučnik koji je dostupan širom sveta.
Dostupan u tri modularne konfiguracije, od kojih se svaka može proširiti na sledeću u svako doba, bez potrebe za zamenom postojećeg modula :
* Anat Reference II Studio - je ultra ultra High End srednje velićine podno stojeći zvučnik
* Anat Reference II Professional - vrhunski model, veliki podno stojeći zvučnik, koji sa korektnim sistemom i podešavanjem čini da ljudsko uvo ne prepoznaje razliku u odnosu na izvorni zvuk.

Anat Reference II is YG Acoustics's flagship line, and at the time of writing is the most accurate loadspeaker available worldwide.
It is available in a three fully modular configurationes, each of which can be expanded to the next at any time, without the need to replace existing modules :
* Anat Reference II Studio - an ultra High End medium sized floorstanding loadspeaker
* Anat Reference II Professional - the flagship, a large floorstanding loadspeaker, which with a correct system and setup is indistinguishable to the human ear from live sound.
Existing Anat Reference (1st generation) loadspeaker can be upgraded at any time to Anat Reference II status. The products are all field uppgradable, in a matter of hours and for a small fraction of coast.

Features :
- Cabinets fully CNC machined from solid slabs of aircraft grade aluminium. The tightest tolerance on the market. No wood, no cost saveing die cast or extruded panels and no plastic.
- Several different alloys used in multi layered construction, for complete elimination of resonances
- Crossover designed using proprietary software, developed entirely in house, with the exclusive ability to optimize both frequency response and phase simultaneously. This technology allows for the flattest frequency response ever measured, combined with the lowest relative phase.
- Crossover individually optimized for each pair of loadspeakers. Thus, the deviation of the finished product is even slighter than that of the individual drive units.
- No stuffing with damping material
- Resonances are eliminated at the source through sophisticated inner geometries, rather than absorbed through lossy stuffing. The loss (friction) is currently the lowest available.
- Tweeter is joint YG Acoustics - Scan Speak design. using Revelator motor system
- No "voicing" - listening serves only as a verification tool, and not as potentially biased research instrument. The sound is not "sweetened", or otherwise manipulated to appear more "pleasant", since YG Acoustics belives live sound to be the the only truly pleasant experience for music lover. Handmade in USA.

Specifications :
Deviation
Less than +/-0.7 dB in the audible band.
+/- 5 Degrees relative phase throughout entire overlap
Exceptional pair matching - Less than +/-0.2 dB between the left and right channels.
Usable output extends from below 20 Hz. to above 40 KHz.
Filters
Passive crossover at 1.75 KHz., proprietary topology - 4th-order Linkwitz-Riley crossover
The phase/amplitude uniformity of the Anat Reference is without parallel.
Designed using software developed in-house
Optimized individally for every pair by designes Yoav Geva
Sensitivity
92 dB/2.83V/1m 2n Anechoic
Impedance
4 Ohm nominal, 3 Ohms minimum in audible band.

The measured performance of the YG Acoustics Anat Reference is exceptional, and correlates to its perceived sonic quality. In addition to a flat frequency response both
on- and off-axis, the phase difference between the tweeter and the mid-woofers is near zero at all frequencies, meaning that they radiate as one integral unit. This unique feature is
a YG Acoustics specialty, and allows for an amazing soundstage, normally associated only with single-driver loudspeakers.
In order to ensure that every set of loudspeakers that leaves our production facility is as accurate as the original prototype, we use a thorough quality control process. In
fact, every Anat Reference set goes through the same set of measurements used for developing the model, and crossover circuits are designed especially for it.
The Anat Reference should be used with a stable amplifier, but it does not have to be very powerful thanks to the active subwoofers.

Dimensions:
Main Module - 50x19x50 cm. (20x8x20") Weight 49 kg (107 lbs)
Studio - 121x33x59 cm (48”x13”x23”) HxWxD, Weight 127 kg (280 lbs)
Professional - 170x43x67 cm (69”x17”x26”) HxWxD, Weight 200 kg (440 lbs)
Excluding grilles, amplifier controls and binding posts.
Amplifier:
Class A/B, with extensive protection mechanisms.
400 W Studio, 800 W Professional.
One unit is used for each subwoofer, for a total of 800 W (Studio Sub) or 1600 W (Professional Sub) per system.

Kipod

Kipod je ultimativno zaveštanje kada su u pitanju kompaktni zvučnici. Suprotno od industrijske prakse - postavljanja vrhunskih komponenti u kutije monstruoznih dimenzija, i niskih po ceni rešenja u proizvode namenjene za kućnu upotrebu - ovde su primenjeni u potpunosti iste tehnologije i materijali kao kod Anat Referentne linije, samo u manjoj fizičkoj skali. Smanjenjem kvantitavnog volumena zvuka ali ne i kvaliteta reprodukcije.
Kipod pruža skoro isti nivo performansi kao i Anat Reference, samo je više ogranicen na nešto skromniji nivo volumena glasnoće i dinamike.
Za audiofile koji traže ultimativno iskustvo živog zvuka u svom domu, i insistiraju na audio sistemu koji je deo enterijera sobe pre nego na izgradnji sobe prema audio sistemu, postoji samo jedno rešenje – YG Acoustics Kipod.

The Kipod is our ultimate statement when it comes to compact loudspeakers. Unlike the common industry practice – placing high-end components in monster-sized flagships,
and lower-cost solutions in domestically-applicable products – we employed the exact same technologies and materials from our flagship Anat Reference line, simply on a smaller
physical scale.
At this point, many experienced audiophiles are probably thinking to themselves: “impossible! After all, the laws of physics cannot be broken, and a certain size is required in
order to achieve high-end reproduction”. They are both right and wrong – while it is impossible to cut size down without consequence, we have managed to provide fullrange
performance from a compact cabinet simply by reducing the quantity of sound, not its quality. Thus, the Kipod offers nearly the same amazing performance as Anat Reference; it is merely limited to more “reasonable” listening volume levels and dynamics.
For audiophiles who look for the ultimate experience of lifelike sound at home, yet insist on incorporating the audio system into the room rather than building the room around the audio system, there is only one solution – the YG Acoustics Kipod.

The measured performance of the YG Acoustics Kipod is exceptional, and correlates to its perceived sonic quality. In addition to a flat frequency response both on-and offaxis,
the phase difference between the tweeter and the mid-woofer is near zero at all frequencies, meaning that they radiate as one integral unit. This unique feature is a YG Acoustics specialty, and allows for an amazing soundstage, normally associated only with single-driver loudspeakers.
In order to ensure that every set of loudspeakers that leaves our production facility is as accurate as the original prototype, we use a thorough quality control process. In
fact, every Kipod set goes through the same set of measurements used for developing the model, and crossover circuits are designed especially for it.
Deviation:
Less than +/-0.7 dB in the audible band.
Less than +/-0.2 dB between the left and right channels.
Usable output from 20 Hz to above 40 KHz.
Filters:
Acoustic 4th-order Linkwitz-Riley crossover at
1.75 KHz.
The phase/amplitude uniformity of the Kipod is without parallel.
Impedance:
8 Ohms nominal, 4.5 Ohms minimum.
The Kipod should be used with a powerful amplifier, but it does not pose a difficult load.
Dimensions:
103x30x42 cm (41”x12”x17”) HxWxD,
Weight 47 kg (104 lbs)
Excluding grilles, amplifier controls and binding posts.
Amplifier:
Class A/B, with extensive protection mechanisms. 200 W RMS.
One unit is used for each subwoofer, for a total of 400 W RMS per system.

Carmel

New passive 2-way floor standing speaker. To be realised on CES 2010 at Las Vegas. More details to follow soon.

YG Acoustics constantly strives to update and improve existing products, as well as create new ones. Therefore the specifications and construction details in this text and related YG Acoustics publications are subject to change without notice.